The BlackBox G4430, the most advanced power quality analyzer in the market today, is equipped with the revolutionary PQZIP patent algorithm for continuous waveform recording. It enables you to predict, prevent and troubleshoot an incidence easily, without the need to set any trigger or threshold in order to capture a specific event.
G4430 Power Quality Recorder
$6,890.00
Description
A comprehensive energy management and power monitoring program is the key to success for any energy provider/consumer, regardless their size. The G4430, the most advanced power meter in the market today, is equipped with the revolutionary PQZIP patent algorithm for continuous waveform recording. It enables you to predict, prevent and troubleshoot an incidence easily, without the need to set any trigger or threshold in order to capture specific event.
Applications
- Utilities (Transmission, distribution, generation)
- Optimizes protective equipment configuration and substation automation solutions
- Ensures a reliable & consistent supply of energy
- Evaluates the performance of breakers and relays
- Identifies and manage peak demand
- Real time power quality monitoring to meet any international standard
- Produces detailed & comprehensive statistical records
- Energy Consumer (Critical power, industrial, commercial, government etc.)
- Measures & analyzes system efficiency, provides solutions and increases profits
- Negotiating capabilities with power providers
- Detect electric bill inconsistencies
- Avoid PQ compliance issues
- Real time PQ monitoring and analysis
Waveform & Fault Recorder
- Continuously samples and records waveform signals at 1,024 sample/cycle
- Threshold free setup
- Waveform capture of up-to 8kVPk
High End Power Quality and billing measurement
Thousands of power quality and energy usage parameters are available in real time in the G4430. The G4430 provides advanced power disturbance recordings
meeting the highest standards on the market. The meter is designed with the most accurate level in order to be used as a primary meter, a sub-meter, as a detector of inconsistencies in electricity bills.
Harmonics Recording
The BLACKBOX is equipped with two FFT engines for harmonics analysis:
- Cycle by Cycle: performs FFT at 1 cycle resolution for extended bandwidth. This engine provides 512 harmonics component at 50/60Hz resolution.
- 10/12 Cycles: performs FFT at 10/12 cycles resolution for an extended resolution and a sub-grouping calculation. This engine provides the amplitude and angle of 512 harmonic components at a 5Hz resolution.
Accuracy standards
The G4430 superior accuracy surpasses by far, the highest standards set by the industry. The G4430 compiles with standard for:
- Power Quality
- IEC 61000-4-30 Class A
- IEC 61000-4-15 Flicker meter
- IEC 61000-4-7 Harmonics and inter-harmonics
- Energy
- ANSI C12.20 0.2%
- IEC 62053-22/23 class 0.2
SCADA Compatible
The G4430 series is equipped with standard industrial protocol for seamless integration into any existing SCADA system:
- Modbus TCP/IP and RTU
- DNP 3
- OPC
Time Synchronization
The G4430 uses a special continuous synchronization algorithm to ensure accurate time stamping of up to 1μsec using SNTP, GPS, IRIG-B and DCF-77. Each G4400 meter acts as a SNTP server therefore each meter on the network is synchronized to each other over LAN. This allows accurate time stamping, without the need of a GPS.
General |
|
Voltage Sampling Rate, Maximum Samples/Cycle | 1,024 |
Voltage Harmonics (Individual, Even, Odd, Total) Up to – | 511th |
Type of Analog to Digital Converter | 16/201 bit |
Internal Memory | 16 GB |
Transient Detection, Microseconds (50Hz/60Hz) | 19.5/16.3μs |
Ethernet Ports | 2 |
Power Over Ethernet (PoE- Out) | 1 |
Voltage Ride Through on Power Loss (up to) | 25 sec. |
Applicable Measurement Standards | EN50160, IEEE1159, IEEE519, IEC61000-4-15,IEC61000-4-7, IEC61000-4-30 Class A,IEC62053-22/23 Class 0.2 |
Applicable EMC Standards | EN55011 Group 1 Class A, EN61000-6-2, IEC60255EN60439-1 (clauses 7.9.1, 7.9.3, 7.9.4, 7.10.3, 7.10.4),FCC Part 15 Subpart B Class A, IEC61000-3-3 |
Voltage Channels |
|
Channels | 3 Phase + Neutral |
Nominal Full Scale | 1,000V |
Maximum Peak Measurement | 8kV |
Input Impedance | 3MΩ |
Uncertainty | 0.1% of Nominal |
Current Channels |
|
Channels | 3 Phase + Neutral |
Nominal Full Scale | 5A |
Maximum Peak Measurement | 50A |
Burden | [email protected] |
Phase | ±0.42°@3A ±0.17°@5A |
Uncertainty | 0.1% of Nominal |
Frequency Measurement |
|
Fundamental Frequency | 42.5 Hz to 69 Hz |
Frequency Resolution | 10 mHz |
Frequency Accuracy | ±10 mHz |
Physical |
|
Dimensions | 175mm x 232mm x138mm |
Weight | 1.7Kg |
Power Supply |
|
Operating Range | 100-260 VAC: 50/60 Hz 100-300 VDC |
Auxiliary DC Supply | 48 VDC |
Auxiliary Supply – PoE In | PoE In According to 802.3af |
Time Synchronization |
|
Real Time Clock | 20ppm |
GPS | 100-200μs |
IRIG B | 100-200μs |
SNTP Server | 50-100μs |
DCF-77 | ±15ms |
Environmental Conditions |
|
Operation Temperature | -20°C to 70°C(-4°F to 158°F) |
Storage Temperature | -40°C to 85°C(-40°F to 185°F) |
Disclamer: Specifications subject to changes without prior notice